the vl connector is a 6.2mm (.244") pitch wire-to-wire connector designed for circuits requiring up to 20a (1 or 2-circuit with awg #12 wire). features ?housing lances for contact retention since the contact retention lances are part of the housing rather than protruding from the contact, they cannot be damaged by handling. they allow the contact to be easily inserted and securely locked into the housing. secondary retainer the secondary retainer is optionally available. this retainer ensures that the contacts are fully seated and locked in the housing and prevents their accidental release. installed after the contacts are inserted, it locks and secures the contact. suited for circuits with high power requirements since these contacts have large cross-sectional areas and high contact pressure, they can accommodate circuits requiring high power. panel lock construction our unique space-saving panel lock is designed to prevent tangling with wires or breaking in cold or dry weather. note:the current rating differs depending on the number of circuits and the wire size used in each connector. the table below lists the current rating as a function of the number of circuits and the wire size. specifications ?current rating: 20.0a ac, dc max. ?voltage rating: 600v ac, dc max. 300v in accordance with the electrical appliance and material control law in japan) ?temperature range: -25?c to +90?c (including temperature rise in applying electrical current) ?contact resistance: initial value/7m ? max. after environmental testing/10m ? max. ?insulation resistance: 1,000m ? min. ?withstanding voltage: 2,000v ac/minute ?applicable wire: awg #22 to #12 (0.3 to 3.5mm 2 ) ?applicable panel thickness: 0.5 to 2.0mm(.020" to .079") *contact jst for details. standards 0 recognized e60389 1 certified lr20812 2 r9351103 573 circuits wire size (awg) #12 #14 #16 #18 #20 1 2 3 4 6 8 12 20 20 19 18 16 16 15 15 15 14 13 12 11 10 10 10 9 9 8 7 7 8 8 8 7 7 6 6 6 6 6 6 5 5 4 current unit:a vl connector disconnectable crimp style wire-to-wire connectors 6.2mm (.244") pitch crimp
574 contact jst 3.2 (.126) 4.1 (.161) 22.2(.874) 3.7 (.146) 3.6 (.142) 2.0 (.079) 3.1 (.122) 3.1 (.122) 16.7(.657) 3.6 (.142) 3.7 (.146) jst 4.1 (.161) material and finish model no. mm 2 awg # insulation o.d. mm(in.) applicable wire q ty / reel pin contact socket contact svm-61t-p2.0 svm-42t-p2.0 svf-42t-p2.0 svm-81t-p2.0 svf-61t-p2.0 svf-81t-p2.0 0.5 to 2.0 0.3 to 1.25 0.5 +0.5 to 0.75+1.25 3.5 20 to 14 20+20 to 18+16 22+22 to 20+18 12 1.9 to 3.4(0.75 to 1.34) 1.9+1.9 to 2.1+2.7 (0.75+0.75 to .083+.106) 4.1(.161) 2,000 phosphor bronze, tin-plated 0.3 +0.3 to 0.5+0.75 22 to 16 1.7 to 3.2(.067+.126) 1.7+1.7 to 2.5+2.7 (.067+.067 to .098+.106) note: 1. contact jst for special products. 2. retainers cannot be used for the 81 type. 3. svm-42t-p2.0 and svf-42t-p2.0 are not ul recognized or csa certified nor tu v approved. housing material: housing...nylon 66, ul94v-0, white retainer...glass-filled nylon 66, ul94v-0, ivory socket contact pin contact circuits current rating receptacle housing(for pin contact) retainer q'ty / bag voltage rating q'ty / bag q'ty / bag plug housing(for socket contact) q'ty / bag q'ty / bag q'ty / bag 2 l jst 13.4(.528) 13.0 (.512) 11.0 (.433) 8.4 (.331) 2.8 (.110) 1 2 l jst 8.2 (.323) 3.0 (.118) 29.5(1.161) 3.4 (.134) 3.4 (.134) 13.4 (.528) 1 5.9 (.232) 9.4 (.370) 11.4(.449) 600v 2 20.0a 500 500 1,000 vlr-02v vlp-02v vls-02v (commonly used for 2-circuit housing and 4-circuit housing) 600v 1 20.0a 500 500 vlr-01vf vlp-01v 7.2 (.283) 13.0 (.512) 11.0 (.433) 9.4 (.370) 2.8 (.110) 9.2 (.362) 3.0 (.118) 29.5(1.161) 7.2 (.283) 9.4 (.370) 7.3 (.287) 6.2 (.244) vls-01v 1,000 2 1 l jst 8.4 (.331) 5.2 (.205) 11.0 (.433) 15.0(.591) 13.0 (.512) VLP-02V-1 vl connector
575 housing material: housing...nylon 66, ul94v-0, white retainer...glass-filled nylon 66, ul94v-0, ivory circuits current rating receptacle housing(for pin contact) retainer q'ty / bag q'ty / bag q'ty / bag voltage rating q'ty / bag q'ty / bag q'ty / bag q'ty / bag q'ty / bag q'ty / bag q'ty / bag q'ty / bag q'ty / bag plug housing(for socket contact) 500 500 600v 4 18.0a 600v 6 16.0a 500 500 1,000 500 500 1,000 1,000 vlr-04v vlp-04v vlr-06v vlp-06v (commonly used for 3-circuit housing and 6-circuit housing) 2 43 l jst 3.0 (.118) 29.5(1.161) 15.0(.591) 3.4 (.134) 3.4 (.134) 13.4 (.528) 1 4 l jst 2 3 5 6 3.0 (.118) 29.5(1.161) 15.0(.591) 3.4 (.134) 3.4 (.134) 19.6(.772) 1 l jst 3 2 4 13.4(.528 13.0 (.512) 11.0 (.433) 2.8 (.110) 15.4(.606) 1 l jst 2 5 46 3 13.0 (.512) 11.0 (.433) 2.8 (.110) 15.4(.606) 19.6(.772) 1 5.9 (.232) 9.4 (.370) 11.4(.449) vls-02v (commonly used for 4-circuit housing and 8-circuit housing) vls-03v 5.9 (.232) 9.4 (.370) 17.6(.693) 2 l jst 3 13.0 (.512) 11.0 (.433) 8.4 (.331) 2.8 (.110) 19.6(.772) 1 3.4 (.134) 3.4 (.134) 2 l jst 3 8.2 (.323) 3.0 (.118) 29.5(1.161) 19.6 (.772) 1 5.9 (.232) 9.4 (.370) 17.6(.693) 600v 3 19.0a 500 500 1,000 vlr-03v vlp-03v vls-03v (commonly used for 3-circuit housing and 6-circuit housing) vlp-03v-1 2 1 3 l jst 8.4 (.331) 5.2 (.205) 19.6(.772) 11.0 (.433) 13.0 (.512) vlp-04v-1 4 3 1 2 l jst 5.2 (.205) 15.0(.591) 11.0 (.433) 15.4(.606) 13.0 (.512) vlr-04vn vlp-04vn-1 vlp-06vn-1 vls-08v 5.9 (.232) 9.4 (.370) 23.8(.937) 234 1 l jst 8.4 (.331) 5.2 (.205) 25.8(.1.016) 11.0 (.433) 13.0 (.512) l jst 1 2 3 4 8.2 (.323) 3.0 (.118) 3.4 (.134) 3.4 (.134) 25.8(.1.016) 29.5(1.161) 1 l jst 6 5 4 3 2 19.6(.772) 11.0 (.433) 13.0 (.512) 5.2 (.205) 15.4(.606) vl connector
vl connector 576 housing note: 1.vlr-01vf is exclusively for free hanging.the other circuits can be used either panel mounted or free hanging. contact jst for special products. 2.models vlp-##v-1 are not tu v approved. circuits current rating receptacle housing(for pin contact) retainer q'ty / bag voltage rating q'ty / bag q'ty / bag q'ty / bag q'ty / bag q'ty / bag plug housing(for socket contact) 500 600v 8 16.0a 500 1,000 100 600v 12 15.0a 100 vlr-08v vlp-08v vlp-08v-1 vls-08v vlr-12v vlp-12v vlp-12v-1 6 l jst 7 8 2 3 4 5 l jst 3.0 (.118) 29.5(1.161) 15.0(.591) 3.4 (.134) 3.4 (.134) 25.8(1.016) 1 l jst 7 8 9 10 11 12 2 3 4 5 6 3.0 (.118) 29.5(1.161) 15.0(.591) 3.4 (.134) 3.4 (.134) 38.2(1.504) 1 l jst 234 678 5 l jst 13.0 (.512) 11.0 (.433) 2.8 (.110) 15.4(.606) 25.8(1.016) 1 l jst 23456 789101112 l jst 13.0 (.512) 11.0 (.433) 2.8 (.110) 15.4(.606) 38.2(1.504) 1 5.9 (.232) 9.4 (.370) 23.8(.937) vls-12v 5.9 (.232) 9.4 (.370) 36.2(1.425) 1,000 (commonly used for 4-circuit housing and 8-circuit housing) l jst 234 1 l jst 5678 25.8(1.016) 5.2 (.205) 15.4(.606) 11.0 (.433) 13.0 (.512) 2345 8 9 10 11 1 6 712 l jst 38.2(1.504) 11.0 (.433) 13.0 (.512) 5.2 (.205) 15.4(.606) material: housing...nylon 66, ul94v-0, white retainer...glass-filled nylon 66, ul94v-0, ivory
577 2 l jst 2 l jst 3 2 43 l jst 4 l jst 2 3 5 6 6 l jst 7 8 2 3 4 5 l jst l jst 7 8 9 10 11 12 2 3 4 5 6 2 1 1 1 1 1 1 1 4 3 2 1 6 5 4 3 2 1 8 7 6 4 3 2 51 12 11 10 6 5 4 93 82 71 3 2 1 1 l jst 1 2 3 4 4 3 2 1 receptacle housing plug housing contact position location numbers contact position numbers are stamped retainer retainer receptacle housing plug housing 3 2 1 4 3 2 1 2 1 2 1 4 3 3 2 1 6 5 4 4 3 2 1 8 7 6 5 6 5 4 3 2 1 12 11 10 9 8 7 2 1 l jst 2 1 3 l jst 4 3 1 2 l jst 1 l jst 6 5 4 3 2 l jst 234 1 l jst 5678 2345 8 9 10 11 1 6 712 l jst 234 1 l jst vl connector 2 l jst 2 l jst 3 l jst 2 l jst 3 2 4 l jst 2 5 46 3 34 678 5 l jst l jst 23456 789101112 l jst 1 1 1 1 1 1 3 2 1 2 1 2 1 4 3 3 2 1 6 5 4 4 3 2 1 8 7 6 5 6 5 4 3 2 1 12 11 10 9 8 7 1
578 panel layout shape l shape ll note: 1. punch holes in the panel according to the sketch and table shown above. burrs must be removed. 2. the strength of the panel must be considered when punching two or more holes. 3. the connector must be inserted from the same side as the hole is punched. 4.2 (.165) a b 9.8(.386) 12.2(.480) d c e 0.5(.020) 9.8(.386) a b d c 18.6(.732) e cir- cuits housing model no. abc e applicable panel thickness mm(in.) panel hole shape d panel hole dimensions mm(in.) general tolerance a,b,d: 0.13 ( .005) c,e: 0.1 ( .004) 2 3 4 6 8 12 vlr-02v vlr-03v vlr-04v vlr-04vn vlr-06v vlr-08v vlr-12v 13.8( .543) 20.0( .787) 13.8( .543) 26.2(1.031) 20.0( .787) 26.2(1.031) 38.9(1.531) 20.6( .811) 26.8(1.055) 20.6( .811) 33.0(1.299) 26.8(1.055) 33.0(1.299) 45.4(1.787) 5.7(.224) 5.7(.224) 7.0(.276) 5.7(.224) 7.0(.276) 7.0(.276) 7.0(.276) 8.5(.335) 8.5(.335) 15.4(.606) 8.5(.335) 15.4(.606) 15.4(.606) 15.4(.606) 1.4(.055) 1.4(.055) 4.2(.165) 1.4(.055) 4.2(.165) 4.2(.165) 4.2(.165) 0.5 to 2.0 (.020 to .079) 4 (single-row) assembly layout 2, 3 and single-row 4 circuits 4, 6, 8 and 12 circuits 40.5(1.594) 44.1(1.736) including retainer 12.2(.480) 40.5(1.594) 44.1(1.736) including retainer 19.3(.760) including retainer vl connector 40.5(1.594) 44.1(1.736) including retainer 14.6(.575) 40.5(1.594) 44.1(1.736) including retainer 21.7(.854) including retainer
|
